afu.tools

Home โ€บ Band plan โ€บ 6 m

6 m band

50 to 52 MHz, 2 MHz wide. Amateur radio is a secondary user here. Only class A (up to 750 W PEP) may transmit. The power limits are set by the Amateurfunkverordnung (AFuV, German amateur radio regulations), the segments are an agreement of IARU Region 1 and the DARC.

not allowed
Class N
not allowed
Class E
up to 750 W PEP
Class A

Where you can transmit

This page needs JavaScript. The allocation and band plan further down work without it.

Allocation under Annex 1 AFuV

Which class may transmit with how much power. The numbers refer to the additional conditions of use below; they are summarised here, the text of the regulations is binding.

RangeStatusClass AClass E Class NProvisions
50 bis 50,4 MHzsecondary750 W PEPnot allowednot allowed5, 16
50,4 bis 52 MHzsecondary25 W PEPnot allowednot allowed5, 16
5
Broadcast reception must not be disturbed, horizontal polarisation, fixed stations only, beacons must be switchable off.
16
Occupied bandwidth at most 12 kHz.

Band plan segments

Which mode goes where on the 6 m band. This is not a rule but an agreement of IARU Region 1 (on 70 cm the DARC band plan); people stick to it so that telegraphy, digital modes and voice don't get in each other's way.

RangeGroupmax. bandwidth ModeUse
50 bis 50,1 MHzTelegraphy500 HzCW exclusive, beacons 50.000 to 50.030
50,1 bis 50,2 MHzAll modes2700 HzSSB and CW, international preferred50.100 to 50.130 MHz intercontinental
50,2 bis 50,3 MHzAll modes2700 HzSSB and CW
50,3 bis 50,4 MHzDigital, narrowband2700 HzNarrowband digital modes and CW, EME, meteor scatter
50,4 bis 50,5 MHzSpecial use1000 HzBeacons exclusivedo not transmit
50,5 bis 50,7 MHzAll modesAll modes, FM/DV gateways, digital communications
50,7 bis 50,9 MHzAll modes12000 HzFM/DV repeaters, outputs
50,9 bis 51,2 MHzAll modesAll modes, wideband digital experiments
51,2 bis 51,4 MHzAll modes12000 HzFM/DV repeaters, inputs
51,4 bis 51,6 MHzAll modes12000 HzFM/DV simplex
51,6 bis 51,8 MHzAll modesAll modes
51,8 bis 52 MHzAll modes12000 HzFM/DV repeaters, outputs

Meeting points on the 6 m band

The band plan says where a mode is allowed. The meeting points say where people actually are: the dial frequency you type into the radio to find someone.

ModeDial frequency (MHz)Note
SSB calling50,15Calling frequency: call, then move aside, don't stay there.
WSPR50,293Beacon mode with a few milliwatts. Who hears me where?
FT850,313Dial frequency in USB, the signal sits 0 to 3 kHz above it.
FT450,318The fast sibling of FT8, mainly in contests.
JS850,318Like FT8, but for text instead of reports. Bring patience.

From the band plan

Dial frequency in upper sideband. Established meeting points, not rules; the band plan is what counts. Sources: FT8, FT4, WSPR: default frequencies of WSJT-X; JS8: default frequencies of JS8Call; Calling frequencies, mode windows: IARU Region 1 band plan; Emergency: Emergency Centres of Activity, IARU Region 1; Emergency DL: DARC emergency communications desk, emergency frequencies; Beacons: NCDXF/IARU International Beacon Project.

Repeaters on the 6 m band

12
repeaters on 6 m in the list

With output, offset, tone and location. To the repeater list with radius search, or by federal state, e.g. repeaters in Bavaria.

Other bands

2200 m 630 m 160 m 80 m 60 m 40 m 30 m 20 m 17 m 15 m 12 m 10 m 6 m 4 m 2 m 70 cm 23 cm 13 cm

All bands at a glance, with frequency search

Legal details from Annex 1 AFuV (conditions of use for the amateur service), retrieved 23 Aug 2026. Segments and markers from IARU Region 1 VHF Managers Handbook 10.03 (February 2026). Where they differ, the text of the regulations applies.